Dial-Up Networking Setup for Windows ME
Create a New Dial-Up Networking Connection using Windows ME
- On your desktop, double click the My Computer Icon
- Double Click the Control Panel icon
 |
- Double-Click the Dial-Up Networking icon
 |
- Double-Click the Make New Connection icon.
 |
- Click the Next button
 |
- Type in a name for the internet connection (i.e. The Office Net)
- Then select your modem name from the drop down menu
- Click the Next button
 |
- Type in the Local Access number that you will be using to connect to The Office Net
- Click the Next button
 |
- You have now created your Dial-Up Networking connection.
- Click the Finish button
 |
- In the Dial-Up Networking window, right click on the Office Net Dial-Up icon
- Click Properties
 |
- Under the Networking Tab
- Under Advanced Options, make sure the “Enable software compression” is checked, and that “Record a log file for this connection” is not checked.
- Under Allowed network protocols, make sure that “NetBEUI” and “IPX/SPX Compatible” are not checked, and that “TCP/IP” is checked
- Then click on the TCP/IP Settings button
 |
- In theTCP/IP Settings window, make sure “Server assigned IP address”, and “Server assigned name server addresses” are selected
- Also, make sure that both “Use IP header compression” and “Use default gateway on remote network” are checked
- Click the OK button
 |
- To create a shorcut on your desktop, right click on the Office Net icon and click Create Shortcut
- Now, in the Dial-Up Networking window, double click on the Office Net icon to connect to the internet
|
- Enter your username. Be sure to add “@odienet.net” after your username. (Example: username@odienet.net)
- Then type in your password
 |
- Click the Connect button to log on to the internet